APC's Switched Rack Power Distribution Units (PDUs) are premium solutions to many of the power management problems seen in today's IT environments. Some of the problems are unauthorized use of power outlets, locked-up equipment, in-rush current, overloaded circuits, and the need of remote access to power outlets in the rack. The Switched Rack PDUs address these problems through individual outlet control, power on and off delays, current monitoring, alarm thresholds, and network management. Individual outlet control allows users to turn outlets on, turn outlets off, or recycle power to equipment, which can reboot locked up equipment and avoid unauthorized use of outlets. Power delays allow users to determine the order in which equipment is powered up or down. Utilizing the power delay feature will avoid in-rush current, which can cause overloads. Monitoring the current draw at the rack level is key to avoiding downtime due to overloaded circuits. The Switched Rack PDUs provide an aggregate current draw, which can be viewed remotely or locally, via digital display. In addition, alarms will be generated based on user-defined thresholds to alert users of potential circuit overloads.

Now you can enjoy full Layer 3, Netgear 12-Port Layer 3 Managed Gigabit Switch functionality at an affordable price. The NETGEAR Managed Gigabit Switch provides maximum throughput and flexibility for demanding networks, with all the Layer 3 features you expect. This 10/100/1000 switch addresses today's high-performance requirements, while providing the control you need - and the future proofing you want. The GSM7312 is ideal as a backbone for 10/100 switches, Gigabit servers, or as the robust core of a demanding, all-Gigabit network. The GSM7312 can be used to inexpensively off-load routers that are segmenting your network and lay the groundwork for new IP-based services. Layer 3 routing combined with L2/L3/L4 Quality of Service, bandwidth provisioning and access control features enable Voice over IP (VoIP) telephony, video conferencing, and other cost-saving applications

Maximize your 10/100 network. The NETGEAR® FSM7326P Switch features Power-over-Ethernet (PoE), which optimizes the installation and power management of network devices such as wireless access points (AP), Voice over IP (VoIP) phones, and security video cameras. Power-over-Ethernet (IEEE 802.3af) capabilities reduce installation costs for many new network productivity devices. It frees your wireless AP deployment from restrictions due to power outlet locations. Power and data switching are integrated into one unit and delivered over a single cable, eliminating costs for additional AC wiring and reducing installation time.

NETGEAR delivers wirespeed Gigabit performance and a full set of Layer 2 management features with unsurpassed affordability. This next-generation, high-speed switch delivers maximum throughput where you need it - to high-performance workgroups at the edge of the network, or as a backbone for 10/100 switches and Gigabit servers in demanding small networks. The non-blocking design offers full Gigabit throughput simultaneously to all 24 10/100/1000 ports. Layer 2 management functionality delivers reliability, control, and availability. It's an easy to use solution that delivers maximum performance right out of the box. The very affordable NETGEAR GSM7224 Layer 2 Managed Gigabit Switch creates a more productive - and future-proof - network. With increasing bandwidth requirements from applications such as video, voice, database management, and other services that slow throughput and response time, you can unleash your network and enable maximum productivity with Gigabit Ethernet for today's high-performance environments. Optimize bandwidth, security, and control with full Layer 2 management capabilities - extensive VLAN support, resiliency, traffic prioritization, port trunking, port mirroring, RADIUS, SNMP, and DHCP features, as well as broadcast storm protection. Fiber connectivity is enabled through four combination Small Form-factor Pluggable (SFP) gigabit ports. Network administrators can use any combination of these features to ensure uptime, availability, bandwidth, and throughput.

Now you can enjoy full Layer 3, Netgear 24-port Layer 3 Managed Gigabit Switch functionality at an affordable price. The NETGEAR Managed Gigabit Switch provides maximum throughput and flexibility for demanding networks, with all the Layer 3 features you expect. This 10/100/1000 switch addresses today's high-performance requirements, while providing the control you need - and the future proofing you want. The GSM7324 is ideal as a backbone for 10/100 switches, Gigabit servers, or as the robust core of a demanding, all-Gigabit network. The GSM7324 can be used to inexpensively off-load routers that are segmenting your network and lay the groundwork for new IP-based services. Layer 3 routing combined with Quality of Service, bandwidth provisioning and access control features enable Voice over IP (VoIP) telephony, video conferencing, and other cost-saving applications.

NETGEAR expands its line of award-winning ProSafe Smart Switches with a suite of 10/100 Stackable Smart Switches. The ProSafe Stackable Smart Switches adds the flexibility of economical, modular growth paired with a more robust management feature set and still gives you the ease of use and affordability you expect from ProSafe Smart Switches. Two of the Gigabit Ethernet ports offer the option of fiber connectivity via Small Form-factor Pluggable (SFP) GBIC slots for long distance links. NETGEAR's ProSafe FS728TS delivers performance and scalability through a 4Gbps, dual-ring, resilient stacking architecture with the ability to mix and match to stack up to six units or 192 10/100 ports - and manage them all at a single IP address!

NETGEAR's high-performance, stackable, Layer 3 Fast Ethernet switch with Power over Ethernet (PoE), delivers maximum throughput and flexible deployment where you need it - to high-density user communities with VoIP, access points or IP-based surveillance camera requirements. With IEEE 802.3af PoE on all 48 ports, the Netgear ProSafe FSM7352PS features 48 10/100 Mbps ports and four 10/100/1000 ports which enable fiber connectivity through four hot-swappable Small Form-factor Pluggable (SFP) gigabit interfaces. The non-blocking design of the switch delivers simultaneous, full wire-speed, low-latency throughput to all ports.

NETGEAR's low-cost, stackable, Fast Ethernet switch delivers maximum throughput and flexibility where you need it - to high-density workgroups at the edge of the network, or in the backbone of small networks. The Netgear ProSafe FSM7352S is a managed 48-port switch with auto-sensing 10/100 ports and four 10/100/1000 ports. This enables fiber connectivity through four hot-swappable Small Form-factor Pluggable (SFP) gigabit interfaces. The non-blocking design of the switch delivers simultaneous, full wire-speed, low-latency throughput to all ports. In addition, the 1U rack-mount form factor uses less rack space and provides a lower per-port cost than comparable Fast Ethernet switches.

The very affordable NETGEAR ProSafe 48 Port Gigabit L2 Managed Switch GSM7248 creates a more productive - and future-proof - network. With increasing bandwidth requirements from applications such as voice, video, database management, and other services that slow throughput and response time, you can unleash your network and enable maximum productivity with Gigabit Ethernet for today's high-performance environments.

The Accelar 8000 chassis features a passive switching architecture that is designed to provide high availability for the wide range of supported technologies. Up to three load-sharing and load-balancing power supplies can be installed, with a fully loaded chassis able to operate with any two power supplies present, providing N+1 power redundancy. All power supplies can be hot-swapped. Both AC and DC power supplies are available, allowing the chassis to be deployed in both enterprise and service provider networks. Fan-trays (dual in the 10-slot chassis) are provided for cooling, and include hot-swap capability. The chassis provides system monitoring and automated reporting of component failure for power supplies, fans, system modules and interface modules. Accelar 8000 supports distributed switching and management, eliminating single points of failure and providing total system resilience. Redundant MultiLink Trunking (MLT) provides scalable riser, server and inter-switch bandwidth, with the trunk ports distributed across separate modules. This eliminates the single point of failure found in many trunking implementations that terminate on a single module in the chassis. LinkSafe backbone and riser connections provide recovery from cabling failures in microseconds, ensuring maximum uptime for critical business applications.Accelar 8000 provides complete security for the campus LAN, restricting network access to authorized users and controlling access to departments, servers and critical applications.The Accelar 8000 chassis provides simplified installation and maintenance, with power supplies, fan trays and all system and interface modules being accessible from the front of the chassis. The system supports scalable switching bandwidth from 50Gbps to 256Gbps and a wide range of interface types, initially including Fast Ethernet, Gigabit Ethernet and ATM. Interface modules for multi-service MAN and WAN connectivity will also be available in future.MultiLink Trunking (MLT) provides scalable riser, server and inter-switch bandwidth up to 8 Gbps today, scaling to 32 Gbps in the future. Effective control of bandwidth-hungry IP Multicast applications is automatically provided using standard IETF protocols - there is no added complexity by unnecessarily adding new protocols to handle Multicast traffic. Policy services and prioritization for critical applications are easily implemented and monitored on the Accelar 8000 using Optivity end to end policy management. Intelligent agents in the Accelar 8000 interface modules provide Class of Service (CoS) support using industry standards to carry priority information across the network.Configuration and management of Accelar 8000 switches is supported by Nortel Networks' industry and market-leading Optivity network management system, including a common Command Line Interface (CLI) across the Nortel Networks enterprise product families. Every Accelar 8000 switch port also supports 4 groups of RMON, Port Mirroring and Remote Traffic Monitoring (RTM), enabling network managers to diagnose problems without leaving their desks.

The Nortel Contivity 2700 delivers IP routing, Virtual Private Networking (VPN), stateful firewall, encryption, authentication, directory and policy services, Quality of Service (QoS) and bandwidth management services in a single integrated platform. With the ability to mix and match IP services through simple activation of license keys, the Contivity 2700 is an ideal solution for enterprises looking for site-to-site and remote access VPN services, dedicated IP routing, and secure Internet access applications.

Nortel Ethernet Routing Switch 5530-24TFD is a next-generation stackable 10/100/1000/10000 Mbps Ethernet Layer 3 routing switch designed to provide high-density Gigabit desktop connectivity and Gigabit and 10 Gigabit fiber connectivity for aggregation for mid-size and large enterprise customers' wiring closets. It combines higher flexibility of deployment using Gigabit copper or fiber connections coupled with exceptional performance utilizing dual 10 Gigabit uplinks.

The BayStack 325 Switches are standalone 10/100 Mbps Layer 2 Ethernet switches designed to meet the needs of small and medium customers. BayStack 325 Switches are designed to provide low-port pricing for a cost-effective desktop switching solution. The BayStack 325 Switches are available in two standalone, compact 1 rack-unit (1U) size models. The BayStack 325-24T Switch has 24 10BASE-T/100BASE-TX auto-sensing ports.

The Nortel Ethernet Switch 460-24T-PWR is an IEEE 802.3af compliant switch to power devices such as IP phones, wireless access points, network cameras, security and lighting devices, and access control devices. It has 24 10/100 Mbps autosensing ports - all of which can provide power - one MDA (Media Dependent Adapter) slot for uplink connectivity, and one cascade module slot for stacking. In addition to Power over Ethernet capability, the switch has advanced features such as Quality of Service (QoS) and high resiliency. It enables enterprise customers to power devices while maintaining connectivity to standard 10/100 Mbps Ethernet devices such as PCs and servers.

The Nortel Ethernet Switch 460-24T-PWR is an IEEE 802.3af compliant switch to power devices such as IP phones, wireless access points, network cameras, security and lighting devices, and access control devices. It has 24 10/100 Mbps autosensing ports - all of which can provide power - one MDA (Media Dependent Adapter) slot for uplink connectivity, and one cascade module slot for stacking. In addition to Power over Ethernet capability, the switch has advanced features such as Quality of Service (QoS) and high resiliency. It enables enterprise customers to power devices while maintaining connectivity to standard 10/100 Mbps Ethernet devices such as PCs and servers. Bundle consists of one BS460-24T-PWR Power over Ethernet Policy Switch, one BPS2000-2GE 2-port Small Form Factor GBIC MDA and one BayStack 400-ST1 Cascade Module (includes cascade cable).

Part of Nortel Networks BayStack 5000 Series, BayStack 5520 Switches are 1 rack unit high stackable 10/100/1000 Mbps Ethernet Layer 3 routing switches designed to provide high-density Gigabit desktop connectivity & Power over Ethernet (PoE) capability to mid-size and large enterprise customers' wiring closets.

The WLAN Security Switch 2380 is the largest switch in the 2300 series and is designed for large deployments and data center applications in enterprise and carrier environments. The 2380 can be licensed to control up to 120 APs which are distributed across a layer 2 or 3 network and connected through one of the 4 Gigabit Ethernet ports. Dual hot-swappable power supplies provide superior resiliency for voice services. This model supports 40 access points.